Diton Premium comes as a special motorcycle spray paint that is formulated with various uses according to the needs of motorbike appearance. Diton Premium offers the highest quality products so that it can make your motorbike look more shiny and charming. There are also many color variations that you can choose according to the final result of the desired motorcycle appearance.

To get optimal repaint results using Diton Premium, you need to know tips and tricks for repainting vehicles using aerosols. With these tips and tricks, your less than optimal repaint results will be resolved. Curious about complete information? Come on, just look at this article!

Tips and Tricks for Optimizing Diton Premium Repaint Results

Method 1. Shake the Can for 60 Seconds

In order for Diton Premium's work to look perfect and give you classy and beautiful pigmentation results, the can of spray paint must be shaken repeatedly. The goal is for the paint to mix perfectly so that the resulting color looks thick and thorough on all surfaces of the object.

The main mistake when shaking spray paint in an aerosol can is to do it in a top-down motion. So that the aerosol doesn't clog easily, just shake the can by rotating it. This will allow the paint and gas in the can to mix evenly.

Method 2. Give a Distance Between the Surface of the Media and the Aerosol About 15cm

The application of spray paint cannot be done haphazardly, including the matter of spraying distance. For optimal results, you must pay attention to the distance of spraying which can affect the final result of painting. If the spraying process is done at a distance that is too close, then the burst of color cannot reach the optimal point and completely cover the object.

Ideally, you should leave about 15cm between the surface of the media and the aerosol. Applying spray paint too close to the object will produce less than optimal results because the resulting coloring will be thick and may melt. Therefore, try to do the spray technique at the recommended distance to get the results you want.

In addition, try also applying the spray technique in the opposite direction so that paint doesn't build up and cause uneven colors. By applying the right spray technique, you can produce a glossy, non-flaky color. Failures such as melted, wet, or textured paint such as orange peel can occur due to technical errors during the work process.

Method 3. Dry the Paint Completely

In order for Diton Premium paint to dry completely, there are three simple ways you can do it, namely:

• Use a heat gun with a temperature of 50-60°C.
• Put it in a special oven for complete drying.
• Dry in the sun.

Conclusion

You can get more optimal repaint results by doing some of the tips and tricks mentioned above. If you want to make your favorite motorbike look cooler, let's buy Diton Premium products and apply them yourself at home right now! Don't forget to get Diton Premium products at the nearest offline store, or e-commerce such as Tokopedia, Shopee, Lazada, Bukalapak, JD.ID, & Blibli.